Definition Of Oxidized Bitumen
Oxidized Bitumen or Blown Asphalt or Blown Bitumen is produced by either Continuous or Staggered Blowing Process. Heated Penetration Grade Bitumen under controlled environment is blown with air which controls the Oil Content in the Bitumen while it oxidized. The different grades for suited applications produced are designated by two numbers to indicate the mid-points of their softening point and penetration ranges.

This process gives the bitumen more rubbery properties than its original formula and they are simply harder bitumen. Hard bitumen under controlled temperature conditions is widely used as an anti-slip layer compound in the piling industry, for the manufacture of roofing felts, the roofing and waterproofing industries, for sound dampening felts and under carriage sealant in the automotive industry, electric cable joint protection, joint filling compound, sealant compound and many others. Also used in sealing saw cuts and joints where expected movements are minimum. It is also used in the manufacturing of bituminous marine mastic for the oil & gas pipeline joints.
Oxidized Bitumen or Blown Asphalt is produced by blowing hot air into the penetration bitumen. This action makes the bitumen more rubbery than its original formula and it becomes harder bitumen. This bitumen recovery the weight loss under heating. Due to low thermal sensitivity, the softening point is much higher than regular bitumen and the penetration index (PI) is higher than road construction bitumen (8>PI>2) due to the letter has a gel-like structure because of asphalt accumulation. Special physical properties of its grade can be used in different applications in the construction business. Oxidized Bitumen is made by ongoing or Staggered Blowing Process. Heated Penetration bitumen under controlled environment is blown with air which controls oil content in bitumen while it oxidized.
Blown Bitumen is produced by the air-blowing of penetration grade bitumen. This is done at high temperatures, resulting in a material of a much higher penetration index. Blown Bitumen is based on petroleum bitumen which is made by blowing bitumen 60/70 by very hot air. The designation of the Blown Bitumen refers to the midpoint of the softening point acceptance criteria. Oxidized Bitumen is based on petroleum bitumen which is made by blowing bitumen 60/70 by very hot air. In addition, the numbers relate to the midpoint of the material’s softening point and penetration respectively. The softening point value measured by Ring and Ball method as determined by ASTM D36. Also, the penetration value is in 1/10 mm as determined by IP49 or ASTM- D5.
Oxidized Bitumen is a solid or semi-black solid material and gradually liquid when heated. Oxidized Bitumen grades are blown or oxidized Asphalt ‘s which are produced by passing air through soft bitumen under controlled temperature conditions. This process gives the bitumen more rubbery properties than penetration or hard grade bitumens and a variety of uses in industrial applications.
Oxidized bitumen is Blown Asphalt which is exporting in various grades as Oxidized Bitumen 115/15, Blown Bitumen 90/40, 75/25, 85/25, 90/15, 105/35, 150/5, 95/25 and any other grade will produce according to order. HJ OIL Co. is a dynamic and multi-faceted limited company actively involved in manufacturing procurement distribution and export of various grades of Oxidized Bitumen. We are structured into focused on oxidization of Bitumen division to serve the different needs of our customers worldwide. We have a long history of supplying Oxidized Bitumen to bitumen factories, asphalt companies, roof insulation companies and membrane sheet manufacture Throughout the world, more than 7 types of bitumen that is produced depend on the type of weather conditions one of them is Oxidized Bitumen or Blown Bitumen, Oxidized Bitumen grades are suitable for sealing saw cuts and joints where there is expected to be the minimum amount of moving in the joint. Their wide temperature range prevents bleeding in high-temperature applications.
HJ OIL Co. is also capable of producing other grades of Oxidized Bitumen according to the specifications of individual clients. Some of the major advantages of Oxidized Bitumen are that it is completely water resistant, highly flexible and durable. Further, it is chemically very stable. Oxidized bitumen is a very flexible compound that is not only chemically stable but also a very durable compound apart from being completely water resistant. Lastly, Oxidized Bitumen has some very prominent technical advantages that makes it a very sought after compound in various applications.
Applications Of Oxidized Bitumen
The most popular grades are grades 95/25, 85/25, 90/40, and 115/15. Oxidized Bitumen high softening temperatures qualify them as the excellent sealant for prevention from bleeding in high-temperature applications. Blown Grade Bitumen shall be broken up into small pieces (for the blown grade in molded cake form) and heated slowly to the application temperature of 220ºC to 230ºC. Oxidized Bitumen is predominantly used in the piling industry as an anti-slip compound for the manufacture of undercarriage sealants in the automobile industry. It is also used as a sealant compound, as a joint filling compound apart from being used in the manufacture of roofing felts and sound dampening felts. Further, Oxidized Bitumen is used in the manufacture of bituminous marine mastic, which is required for the oil and gas pipeline joints.
Oxidized Bitumen Grades are suitable for sealing saw cuts and joints where there is expected to be the minimum amount of moving in the joint. Their wide temperature range prevents bleeding in high-temperature applications. Oxidized bitumen can also be used in industrial applications like roofing, flooring, mastics, pipe coatings, electrical, for carpet-backing, corrosion protection, acoustic panels and the manufacture of paints, amongst other applications.
Oxidized Bitumen (CAS number 64742–93–4): Asphalt treated by blowing air through it at elevated temperatures to produce physical properties required for the industrial use of the final product. Oxidized asphalts are used in roofing operations, pipe coating, undersealing for Portland cement concrete pavements, hydraulic applications, membrane envelopes, some paving-grade mixes , and the manufacture of paints.
Blowing still: A closed-process vessel fitted at its base with a sparger and used in the air-blowing process to make many types of roofing asphalt.
Coating asphalt: An air-blown or oxidized asphalt used to manufacture roofing materials used in a variety of roofing systems such as asphalt shingles, polymer-modified bitumen roofing, reinforcing and underlayment felts, and roll roofing products.
Modified bitumen: A roofing system based on membranes manufactured by impregnating or coating one or more fabric plies with a straight-run or oxidized asphalt modified using a polymer, usually atactic polypropylene (APP) or styrene-butadiene-styrene (SBS). Modified bitumen systems may be torch-applied or installed by adhesion in hot asphalt or a cold-applied, solvent-based asphalt adhesive (cutback asphalt). Modified bitumen systems are used on low-slope (primarily commercial or industrial) roofs.
• Used As a bonding bitumen for roofing sheet membranes.
• Used As a hot-applied waterproofing layer.
• Used in Carpet tile manufacture.
• Used As a raw material for liquid bitumen coatings.
• Used in production of bituminous paint, mastic.
• Used in rust proof pipe coatings.
• Used as an anti-slip layer compound in the piling industry.
• Used in production of roofing and sound dampening felts, Used as under carriage sealant in the automobile industry, electric cable joint protection, joint filling compound, sealant compound and much more in our day to day life.
氧化瀝青的定義(吹氣瀝青)
氧化瀝青,也稱為吹氣瀝青或吹製瀝青,是通過一種稱為連續吹氣或間歇吹氣 的特殊工藝生產的。在此過程中,滲透級瀝青在受控環境條件下加熱並吹入空氣。這種吹氣過程會減少瀝青中的油含量,同時使其氧化,從而產生比原始配方更硬、更具彈性的材料。
氧化瀝青的牌號由兩個數字表示,分別代表其軟化點 和滲透範圍 的中值。這些特性使其非常適合需要耐用性和靈活性的各種工業應用。
氧化瀝青的主要特性
更高的軟化點 :由於其低熱敏感性,氧化瀝青的軟化點遠高於普通瀝青。
更高的滲透指數 (PI) :氧化瀝青的 PI 显著高於道路施工瀝青(8 > PI > 2),由於瀝青積聚而具有凝膠狀結構。
完全防水 :完全防水,使其成為防水應用的理想選擇。
化學穩定性 :高度穩定且耐用,確保長期性能。
靈活性 :儘管更硬,但仍保持出色的靈活性,適用於動態環境。
氧化瀝青的應用
由於其獨特的特性,氧化瀝青廣泛應用於各個行業。一些最常見的應用包括:
屋頂行業 :
用於製造屋頂氈、瓦片和防水膜。
在高溫環境下提供出色的抗滲性能。
汽車行業 :
在打樁行業中作為防滑層化合物。
用作汽車底盤密封劑。
建築行業 :
密封鋸切縫和接縫,特別是在預期接縫移動最小的情況下。
建築項目中使用的接縫填充和密封化合物。
石油和天然氣行業 :
用於生產管道接頭的瀝青海洋填料。
其他工業用途 :
生產隔音氈。
管道防腐蝕保護。
製造油漆、填料和地毯背襯材料。
氧化瀝青的常見牌號
最常見的氧化瀝青牌號包括:
95/25
85/25
90/40
115/15
這些牌號根據其特定的軟化點和滲透值進行選擇,以確定其在不同應用中的適用性。
技術規格
軟化點 :使用環球法測量(ASTM D36)。
滲透值 :以 1/10 毫米計(IP49 或 ASTM D5)。
應用溫度 :通常加熱至 220°C–230°C 使用。
為什麼選擇 HJ OIL 公司?
在 HJ OIL 公司,我們專注於高品質氧化瀝青的生產和出口。我們的產品系列包括所有標準牌號,如 115/15、90/40、75/25、85/25、90/15、105/35、150/5 ,以及根據客戶規格定制的牌號。憑藉多年的經驗,我們向以下領域供應氧化瀝青:
瀝青工廠
沥青公司
屋頂隔熱材料製造商
全球膜片生產商
我們對質量和客戶滿意度的承諾確保我們的產品符合最高的國際標準。
氧化瀝青的優勢
完全防水 :適用于防水應用。
高靈活性 :即使在惡劣條件下仍保持靈活性。
耐用性 :化學穩定且持久。
寬溫度範圍 :防止高溫環境下的滲漏。
結論
氧化瀝青是一種多功能且耐用的材料,應用於屋頂、建築、汽車、石油和天然氣等行業。其獨特的特性使其成為需要高性能材料的行業的重要組成部分。對於優質氧化瀝青,請信賴 HJ OIL 公司,精確可靠地滿足您的需求。
氧化瀝青是一種多功能且耐用的材料,廣泛應用於屋頂、建築、汽車、石油和天然氣等行業。其獨特的特性使其成為需要高性能材料的行業的重要組成部分。HJ OIL 公司提供高品質氧化瀝青,滿足全球客戶的需求。
-
Oxidized Bitumen 150/5
-
Oxidized Bitumen 115/15
-
Oxidized Bitumen 110/30
-
Oxidized Bitumen 105/35
-
Oxidized Bitumen 105/15
-
Oxidized Bitumen 90/40
-
Oxidized Bitumen 95/25
-
Oxidized Bitumen 90/15
-
Oxidized Bitumen 90/10
-
Oxidized Bitumen 85/40
-
Oxidized Bitumen 85/35
-
Oxidized Bitumen 85/25
-
Oxidized Bitumen 75/35
-
Oxidized Bitumen 75/25
-
Bitumen Number#
- Oxidized Bitumen 150/5
- Oxidized Bitumen 115/15
- Oxidized Bitumen 110/30
- Oxidized Bitumen 105/35
- Oxidized Bitumen 105/15
- Oxidized Bitumen 90/40
- Oxidized Bitumen 95/25
- Oxidized Bitumen 90/15
- Oxidized Bitumen 90/10
- Oxidized Bitumen 85/40
- Oxidized Bitumen 85/35
- Oxidized Bitumen 85/25
- Oxidized Bitumen 75/35
- Oxidized Bitumen 75/25
- Bitumen Number#